BLANCOBENT UF (25 kg)

Item No.015320
Price $136.5
Per Each
Excl. Tax
Available
Each

Description

BLANCOBENT UF

Bentonite for use during crossflow filtration

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step
protein stabilization and crossflow filtration.
  • Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
  • Powdered formulation is free of crossflow damaging sand and grit
  • Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 μm)
  • Can be prepared in room temperature water
  • Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
  • Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals
  • Contact Time: During crossflow

Recommended Dosage: Bench trials recommended
  • Wine: 200–2000 ppm – 20–200 g/hL – 1.6–16.8 lb/1000 gal
Usage: Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6–12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.
Storage: Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25°C (77°F). Reseal opened packaging immediately.

Specifications

Brand
Erbsloeh
Product Source
Bentonite

BLANCOBENT UF (25 kg)

Item No.015320
Price $136.5
Per Each
Excl. Tax
Available
Each

BLANCOBENT UF

Bentonite for use during crossflow filtration

BLANCOBENT UF is a highly purified powdered bentonite allowing for 1-step
protein stabilization and crossflow filtration.
  • Compatible for direct dosing into symmetrical hollow fiber membrane crossflow systems
  • Powdered formulation is free of crossflow damaging sand and grit
  • Does not cause excessive abrasion to crossflow membranes due to the lack of large, abrasive particles (<100 μm)
  • Can be prepared in room temperature water
  • Always consult your crossflow manufacturer prior to use (approved for use for use with Pall Oenoflow system)
  • Not recommended for use on wines that will not be crossflow filtered - use FERMOBENT PORE-TEC or NACALIT PORE-TEC depending on goals
  • Contact Time: During crossflow

Recommended Dosage: Bench trials recommended
  • Wine: 200–2000 ppm – 20–200 g/hL – 1.6–16.8 lb/1000 gal
Usage: Add BLANCOBENT UF the night before or day of crossflow filtration. Add slowly to approximately 10 times its weight of room temperature water under constant stirring. Allow a rest period of 30-60 minutes, then stir again thoroughly. Let the mixture swell for 6–12 hours. Dispose of supernatant and add remaining bentonite slurry to the wine while thoroughly mixing.
Storage: Dated expiration. Store in a dry, odor-free and well-ventilated environment below 25°C (77°F). Reseal opened packaging immediately.

Specifications

Brand
Erbsloeh
Product Source
Bentonite